V1.01.xx
|
|
--------
|
|
PSPVerify Released.
|
|
Added (00):
| support for the new CSV Repository System (aka Mirror2)
|
Changed (01):
| better automated csv upload handling.
|
Added (01):
| faster writing of trigger config.
|
Added (02):
| Updates from CSV Repositories are always handled. Even if the local csv is considered better. That means a Final CSV can be replaced by a Ongoing
|
| CSV from the remote Repository. This can be deactivated (in Settings) but it is recommended to leave this setting alone.
|
| it does only affect the latest changes (the ones that are received after installation of V1.01.02) only the csvs
|
| that are uploaded from today on are updated. it is not about synchronizing with the very old stuff that was updated years ago
|
| on the repositories.
|
| this feature is about beeing able to get a (final) back to (ongoing) - only when someone uploads a csv
|
| the only problem could be that you reset the "last-updated" counter for the csv repositories - or add a new one (with a new name)
|
| then you would probably get the last 2000 entries compared
|
| an turned off 'C' flag (auto update CSVs) in PSPVerify should not update a csv - no matter what the other option is set to.
|
Changed (03):
| Min time for checking for updates reduced to '0.1' (that is 6 minutes) - as the update does not waste any bandwith if nothing is new.
|
Added (04):
| Blocking Bittorrent Leeches for triggers, selectable from the menu is 0.5 to 7 days. For that time no Bittorrent Leech is started automatically.
|
| The block can be removed with 'UnBlock' at any time. To be used for bad leeches that are constantly restarted because the tracker reports a
|
| wrong count of seeds or if the remote csv is found to be bad. Automated compare compares only by size and name of files not crc.
|
Added (05):
| Old/Unused entries from the triggers are removed during a triggerupdate.
|
Changed (07):
| Major Change of the way PSPVerify writes and reads INI/TRG files, now it runs in sync with mirc read and writes, this can possibly lead to
|
| blocking calls (freezing up) while mirc locks files (and freezes).. However this new way of handling the writing should ensure that no data is
|
| lost during asynchron write accesses.
|
Fixed (09):
| A Nasty bug causing 'HASH' entries in the Ghostfile is fixed now. All bad entries are removed automatically.
|
Added (11):
| 'Hide Burned' Button added
|
Added (11):
| ACM 2.0 - New ACM Organizer - See the HOWTO at the end of this README.
|
Fixed (11):
| Movecollections cleans remaining empty folders up.
|
Added (12):
| Torrents to be removed are identified by names in uTorrent (over the WebUI) too! This will remove all torrents with the same name, even if the old
|
| .torrent file cannot be accessed (any more) - which has lead in the past to double torrents in the client.
|
Fixed (13):
| The Options/Settings windows are scrollable.
|
Added (14):
| after every Check (not the Readonly) that has 0 missing files, all files are deleted in "removed" folders : _Wrong_crc and _Wrong_size .
|
Added (15):
| removed folders : _Wrong_crc and _Wrong_size folders are also deleted when a collections completes (even with read only check)
|
Added (17):
| partial PS leeched file status are displayed in the Report.
|
Added (19):
| priority and leech block calculation has been adapted to the new Part Leech System of PS
|
Added (20):
| Bad_CRC files are moved to the PSTEMP dir and not to the Removed Folder
|
Added (20):
| nerocmdoverride setting to specify the nerocmd.exe directly instead of looking for it in the Nero folder.
|
| example: add the line to PhotoServe\Settings\PSPVerify_Config.ini
|
| nerocmdoverride=C:\Program Files\Common Files\Nero\Lib\NeroCmd.exe
|
| do this while PSPVerify is not running.
|
Added (21):
| the debug window shows information about the nero process when trying to burn
|
Added (22):
| the nerocmd is found for Nero8 automatically. However Nero8 seems to have a bug and burn does not YET work. (see the switch 2 'Addeds' later)
|
| FIX: http://www.nero.com/enu/downloads-sdk.html (its free)
|
| download the sdk and replace the nerocmd with the nerocmd inside the SDK
|
Added (22):
| protectburnedcollectionwith param added. This is hidden because it will freeze PSPVerify for the full rar process totally.
|
| that's why you should not use it, then you cannot complain. This option will RAR up the full collection folder and put 1GB rar
|
| files to the DVD instead of the files themselves.
|
| example: protectburnedcollectionwith=C:\Programme\WinRar\WinRar.exe
|
Added (22):
| switch to disable the usage of the param file for burning. instead all params from the param file are put in the command line.
|
| use this switch to make Nero8 work, but use it at your own risk since the command line size is limited and params can be
|
| truncated. This risk is high if you burn many small collections with many paths and csv names to be put in the command line,
|
| burning a DVD sized Collection will work in almost all cases.
|
Added (22):
| a new remote command to write Nero Images. Intended use is to write every night a few of the Disc Images to be burnt.
|
| Usage: I have created a .bat file with 1 command inside:
|
| echo >P:\Programme\mirc\PhotoServe\Settings\Checker_RC.txt burn DVD\d+ r 2 Z:\Burn_IMAGES
|
| This will make PSPVerify create 2 Disc images of Ready-TO-Burn collections that are DVDxx triggers (no CDxx)
|
| If I put this batch file into the task planner to be run at 3am I will find every morning 2 NRG files in Z:\Burn_IMAGES
|
| and can burn them. This works especialy good with the 'protectburnedcollectionwith' parameter in PSPVerify.
|
| Note that the Target Path may NOT CONTAIN SPACES.
|
Added (23):
| The compression of Collections is calculated and not 'guessed'. Thus eliminates the need to compress the Collection
|
| and simply store it with maximal recovery records.
|
Changed(24):
| Minor change to display the Versions of NERO on start.
|
Fixed (25):
| Bad option `-text' at ....
|
Fixed (26):
| Minor problems all around ..
|
Added (27):
| 2 new config settings - a Trigger can be turned to auto-update (temp or permanent) if the stats value of a collection
|
| is above a set limit (Settings -> Misc Options -> Default Trigger States)
|
Added (28):
| AutoCheck will stop checking (after it finishes the current Collection) if user moves the mouse (IDLE < 100)!
|
Added (29):
| Hunting into a leeched Collections causes an interruption of the leech -> requeue -> releech (required PS4.9b34 or above)
|
Changed (29):
| Hunt program code rewritten
|
Added (30):
| The reports show the absolute numbers of parts as well for partial downloads
|
Changed (31):
| reports lists files "unsigned" decimal
|
Fixed (35):
| When moving collections and there was not enough space on the target drive the collection would be left turned OFF
|
Added (36):
| When creating csvs:
|
| * problems like double spaces will be correct in the filesystem.
|
| * there is a switch to correct smaller uglinesses in file paths (like a space in front of a coma)
|
| * there is a swtich to extract all files in a found zip file before creating the csv (so that the csv contains the
|
| zip content instead of the zip file. The zip file is extracted and deleted, so dont use this setting if you build csvs with zip files)
|
Added (37):
| Primary Support for burn-tool ImgBurn from www.imgburn.com
|
| ImgBurn is a freeware tool that supports a lot of command line switches and is now used in PSPV.
|
| Nero should still be working (i hope) . But it is untested .
|
Added (37):
| 2 new limits in the BurnDialog:
|
| * you can now limit the amout a disc is filled to prevent it from being offered in the dialog
|
| (a level of 85% while set to 4480MB will not create any DVD that is not at least filled 85%)
|
| * you can also limit the total amount of discs that are offered in the dialog
|
| (if set to 8 and even if you selected 100DVDs to burn, will only create the first 8 (best filled discs))
|
Changed(37):
| The way the automated burn (image create) works now has been changed.
|
| echo >P:\Programme\mirc\PhotoServe\Settings\Checker_RC.txt burn CD\d+ r 3/9 D:\Burn_IMAGES
|
| creates 3 discs (of the current setting in the burn dialog) up to a maximum of 9 discs in that folder
|
| you can mix any CD or DVD or even the Pic-Only and Vid-Only Discs
|
| the 2 new limits apply also to the auto creating
|
Fixed(38):
| Works with Nero again
|
Added(45):
| http ignore when a server is down
|
Added(46):
| new Collection Tool "Attach Backup Drive Directory"
|
| since you can have a backup Harddisk full of collections you would take hours or days to restore them.
|
| to make it quick you can use this feature to restore your collections in one command.
|
| this does the following:
|
| *) search 1 directory you specify for collection folders (all in flat dir structure, this means no group subfolder or anything)
|
| example: you specify F:\Backup Dir\ -> this will find F:\Backup Dir\SNCD1, F:\Backup Dir\SNCD2, F:\Backup Dir\SNCD3, ...
|
| *) if the directory name matches EITHER a trigger OR a csvname OR a collection name it will attach the folder to that collection
|
| ONLY IF the collection has no valid path. this means if the collection is turned off or not, the path of the collection MAY NOT EXIST!!
|
| *) turn on the collection (if it was turned off)
|
| *) download the latest CSV ! it does this - if possible - ALWAYS! if it cant find a csv it will be a problem you have to solve
|
| *) check all freshly attached collections to make sure the count is correct. Since there is no cache this can take a long time.
|
Added(47):
| added "eject after burn" switch for ImageBurn
|
Added(48):
| a new option in "Config -> Settings -> Default Trigger States" : "turn on autoupdate when last trigger (of a series) completed"
|
| this feature checks for SETUP and INCOMPLETE collections, and if there are 0 collection with autoupdate on it will turn on the first found
|
| trigger. Please not that this does not mean it will turn on the next trigger after the completed (and this is a smart feature).
|
| Example. Triggers series "abcd" -> you have setup
|
| abcd1 with 123/123 files autoupdate 0
|
| abcd2 with 120/120 files autoupdate 1
|
| abcd3 with 0/12 files autoupdate 0
|
| abcd4 with 0/13 files autoupdate 0
|
| abcd5 with 130/130 files autoupdate 1
|
| abcd6 with 150/150 files autoupdate 1
|
| abcd7 with 123/124 files autoupdate 0
|
| this will turn on abcd3 ! because it is the first trigger that is incomplete !
|
| if abcd3 OR abcd4 OR abcd7 are set to autoupdate nothing would happen.
|
| since abcd3 is turned on now, nothing happens until the last of all autoupdate triggers (in this case abcd3) is completed.
|
Added(49):
| automated way to upload samples to csv sites that support this.
|
| You have to configure your csv_reps.ini file (see your prefered website for details) to have c10 and c9 fields.
|
| Then select several triggers (that are online and have files) and press CTRL+SHIFT+F8 to start the automated upload process.
|
Added(51):
| New switch for "turn on autoupdate when last autoupdate trig of series completed" to limit this function to FINAL and REBURN csv
|
Added(52):
| If both settings "turn on autoupdate when a collection gets a csv that is final/pre-final" and
|
| turn on autoupdate when last autoupdate trig of series completed are turned on, PSPV will not setup a new csv as
|
| AUTOUPDATE unless there is another trigger in that collection series already set to AutoUpdate
|
Changed(53):
| OFFLINE collections are skipped in AutoUpdate count for collection series.
|
Added (54):
| As a test - you can disable the cache for Creating CSV - lets see if this helps with crc problems that someone is experiencing ;)
|
| (settings -> Misc Options -> CSV Create Options -> no cache)
|
Added (55):
| Statsbot values are now interpreted as per byte values. The value will change when a new csv comes in. The value shown is for the csvsize
|
| so it will not change when you leech. Also the sort by value will sort on the per byte basis, because otherwise a low valued DVD will always be in
|
| front of a low valued CD even if the DVD is much more worthless.
|
Fixed (56):
| A very nasty bug, where the crc calculation for creating csv was completly destroyed. (Introduced in .54)
|
Fixed (56):
| bug disabling the Sort by Value Function .. sorry this took so long to find. Do "Stats Refresh" to get rid of the insane values.
|
Added (56):
| new switch to disable the per byte basis for the statsvalues. All collection are assumed a fixed size (that means the values are much higher for CD collections, but
|
| on a value per bytes (on the disc) basis it is more correct)
|
Added (58):
| AutoHD Backup can be limited to collections with final csvs.
|
Added (59):
| Extra Info is now added when getting a csv from a channel.
|
Added (60):
| A little ASCII Graph in the report, if Transfer Stats are Available.
|
Fixed (61):
| Bug that showed random stats for triggers in reports
|
Fixed (62):
| Small bug that caused the hostbase to be not properly detected for http requests
|
Added (63):
| Another cool feature when creating self-maintained csvs. Selecting "Align Files" from the "self-maintained" Menu will do this:
|
| *) check the size of the selected Trigger files (in the collection folder)
|
| *) move oversized files (sorted by alphanum, so use date-styled dirs) to the next trigger
|
| *) create a new dir for the next slot (the slot has exists)
|
| *) set the full slot to Pre-Final
|
| *) start a csv-create process for all "touched" slots
|
Fixed (64):
| Bug with Align Files where the sorting of the dirs did not work
|
Added (65):
| Menu item for 'Self-Maintained' to quickly change the state of a CSV (Rename CSV) without any further activity.
|
Fixed (66):
| Reports dont show empty transfer statistics.
|
Added (67):
| Added a few more Windows-Ways-To-Find-Applications-For-Typeextentions ! Good work to have an Operating System have ~30 different methods !!
|
Fixed (67):
| ACM Bug when selecting target drives space rules
|
Fixed (67):
| Download of Stats from 'strange' urls
|
Changed(69):
| Improved internal search algorithm in Trigger Files => Better performance for all Operations
|
Fixed (69):
| Fixed a minor bug in the 'Align Files' function
|
Added (70):
| Added an ignore file pattern field for files inside archives. Files in Archives matching will not count and
|
| archives with only these pattern will get deleted. <10k are deleted directly others are deleted to Recycle bin (if enabled in PSPV)
|
| a good pattern is '(\.txt|thumbs?\.db)$' which will ignore all '*.txt, thumb.db and thumbs.db' files ;-)
|
Added (71):
| Added 'Correct Changed Drive Letters' in Menu 'Collection Tools' :
|
| the commands checks ALL online collections for existing report, csvfile and the collection path.
|
| If one item is missing it looks on all existing drives if the path/file exists there and
|
| changes the setting if a positive test is done.
|
| This is very useful when a drive letter is changed, since all paths are just the same but only
|
| the drive letter is different.
|
Fixed (72):
| A bug where the Align Files function does not work if there is only 1 further trigger, which was ignored.
|
Added (73):
| FTP Upload works now where available
|
Added (74):
| Support for Torrents to be redownloaded from the tracker after upload, if the Tracker added some extra config.
|
Added (75):
| The files for created torrents are now sorted by date! This will help to create a new torrent with all files in the same
|
| order as any previously created torrent would have been sorted. Which will give a new torrent that can be 100% from the
|
| previous torrent. Unless the dates are wrong...?
|
| (This will however not help when a older file is replaced,
|
| and because you can never know which file might be replaced in the future this can never be done.)
|
Added (76):
| PSPV supports Autoconfig from BT Trackers (there is a button in Settings -> Bittorrent -> Autoconfig
|
Changed(79):
| FTP Upload has now a timeout of 60seconds
|
Added (79):
| When checking a BT Leech Locked collection to find out if its complete, PSPVerify will resize all files that are too large and check the crc again.
|
| This is a workaround of a bug in uTorrent where uTorrent creates a few extra bytes sometimes.
|
Changed(80):
| Many tweaks of values
|
Added (80):
| New option for burning UDF in Burn Dialog for ImgBurn.
|
Added (81):
| CSV and CSV path are split to two columns.
|
Added (81):
| Added two new export menu entries. You can now export the viewport content (that is everything displayed)
|
| to the clipboard. You can export all displayed lines or just the selected lines.
|
| The entries in a line are separated by TABs and the Lines are separated by newlines.
|
| This content can be pasted to any known Table Calculation Tool.
|
Added (81):
| A second parameter can be supplied when starting PSPV (where the first is Mirc-Dir, which is the base dir)
|
| the second param will override the Triggers Location Path. This allows to run a second instance of PSPVerify
|
| in a different location, while it still uses the same Trigger config as the other instance. Since PSPVerify
|
| uses a file-lock technique it is safe to change settings in multiple instances and the files will not be harmed.
|
| This is usefull to run some jobs like burning Discs in 1 extra PSPVerify instance while the other one
|
| keeps running unblocked.
|
| NOTE: some settings are stored in the ghostfile and those are unique to each running instance.
|
| NOTE: you can't use this to run several leeches in multiple Networks in PhotoServe
|
| EXAMPLE: run 2 PSPVs (1 will use all defaults in C:\Mirc, while the other 1 will use its own path and
|
| the same triggers)
|
| > PSPVerify.exe C:\Mirc
|
| > PSPVerify.exe C:\Another-Mirc C:\Mirc\Photoserve\Triggers
|
Added (82):
| when using utorrent there is no longer a read-only check to find out if a BT leech is complete. Instead the
|
| WebUI interface is queried, and only if seeding is returned for the torrent, the read-only check is performed.
|
Fixed (83):
| 0 bytes files are no longer included in the torrent.
|
Fixed (84):
| no archives are deleted when they are larger than 10k (as password protected archives are falsly detected as empty)
|
Added (84):
| Added an option to clean up the "removed" Files folder, you can set how often to check and how old the files have to be
|
Added (85):
| you can create your own entries in the Collection Tools -> Tools Urls Menu .
|
| adding a line to the [config] section of the PSPVerify_Config.ini will add an entry to the menu, the format is
|
| toolurl.=,,
|
| The appears nowhere but has to be unique. is shown in the menu, and is
|
| the url to be opened in your browser.
|
| Example (put the line below into your PSPVerify_Config.ini, somewhere into the [config] section.)
|
| toolurl.pspv=http://pspv.dyndns.org/,The PSPVerify Homepage
|
| !! NOTE : you may only edit the PSPVerify_Config.ini while PSPVerify is NOT RUNNING !!
|
| NOTE: Currently supported modes are (you can "OR" them):
|
| 0 = leave the url alone like it is
|
| 1 = add incomplete triggers to the url (in this format: trig=trigger1,trigger2,trigger3
|
| 2 = add incomplete series to the url (in this format: series=series1,series2,series3)
|
| 4 = add setup series to the url (in this format: series=series1,series2,series3)
|
Added (86):
| the crc32 calculation is now "thread safe" - maybe this fixes all crc problems people had in the past
|
Added (87):
| the AutoCheck (if enabled) does additionaly a quick "count of files" every 10 days for all
|
| online and complete collections. a count of files takes a few seconds and it will basically just
|
| check if the dir is missing any files.
|
| this check is only done when you are idle and it will stop when you move your mouse.. dont worry! DO NOT FREAK!
|
Added (87):
| When PSPV is interrupted during moving a collection it will resume the move the next time it starts.
|
Added (87):
| Copy Collection has a switch to copy the csv. The target is the same location as the csv is, just on the Backup Drive.
|
Added (88):
| PSPV AutoCheck checks online collections with a FAIL (or other) status. Because only offline collection should have a status of OFF
|
| everything else is some kind of "problem" and should be checked.
|
Added (88):
| new switch in Settings : "Protect with WinRar" (needs a restart).
|
| If it works PSPVerify will display a log entry during startup: "All collections will be compressed before burn with ..."
|
| Burned collections can be protected with WinRar (which has to be installed). Instead of burning the
|
| collection folder PSPVerify will create a rar with as many recovery records that fit on the CD/DVD. A recovery record can
|
| be used when a block on the CD/DVD becomes inaccessable. That way you can fully restore a collection from a CD/DVD
|
| even if you cannot read some of the data on that disc. (To recover a broken rar file you have to select "REPAIR RAR"
|
| in WINRAR Application. It will "repair" the rar to a new location and you can extract all files from the restored rar
|
| or you can reburn the restored rar to another DISC)
|
Added (88):
| Some new reports details
|
Added (88):
| Added "Hide Incomplete" Quickfilter Button
|
Updated(89):
| Import Settings
|
